This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.


BLACK FRIDAY •UP TO –20% OFF A SELECTION OF OVENS AND BARBECUES • UNTIL DECEMBER 2

Logo MyBarbecue boutique en ligne de barbecue
Currency

    Cart 0

    No more products available for purchase

    Products
    Pair with
    Subtotal Free
    View cart
    Shipping, taxes, and discount codes are calculated at checkout

    Installation, use and maintenance

    Assembly and installation

    Assembly plan, choosing the mortar, preparing the base and setting everything up: answers to your questions about assembling and installing your barbecue or wood-fired oven.

    30 questions · updated on November 19, 2026

    Where can I find the manual, the assembly plan, or help with assembly?

    The assembly plan will be sent to you by email after you place your order, along with a demonstration video. If the plan doesn't match your model, please contact us.

    Which mortar, adhesive, or cement should you use to assemble the barbecue?

    Follow the assembly plan for your model: it shows whether assembly uses tile adhesive or mastic, depending on the model.

    Do you offer an installation or assembly service, and how much does it cost?

    No, we don't offer an assembly or installation service. We have a partnership with the NeedHelp platform to help you find professionals.

    What are the rules for the chimney and the smoke outlet?

    The tubes fit together without connectors, and a clamp is supplied with each tube. We recommend a maximum of four extensions; beyond that, secure the chimney to a wall. For a side outlet, use 45º elbows instead. Check the instructions for your model.

    Other assembly or installation questions

    If you have any specific questions, contact our team and let us know your model. Dimensions and specifications are listed on the product page on our website.

    How do you build a masonry or prefabricated barbecue, and in what order?

    Follow the order in your model's assembly plan exactly. Wipe off any excess glue with a damp sponge; our team can provide a demonstration video.

    Does the barbecue or the Oven come assembled or as a kit?

    All of our ovens are delivered ready to use, with no assembly required, but they need a stable, level base or stand. Masonry barbecues are delivered as a kit, to be assembled according to the assembly plan.

    What base or surface do you need to install the barbecue, and what dimensions should it have?

    You need a solid, flat, level base; for masonry and ovens, a stable slab, with the thickness given in the model's instructions. Leave about 5 cm of clearance from any fixed structure.

    How do you lift or move the Oven?

    Depending on the model, lifting rings allow it to be lifted with a crane. The weight is listed on the product page of the website; plan for suitable equipment. Transport to the installation site is your responsibility.

    How do you apply assembly adhesive or sealant, and what are the drying times?

    Follow the assembly plan for your model (tile adhesive or sealant). Clean off any excess with a damp sponge.

    What components and parts are included?

    The list of parts is included in the assembly plan for your model. We do not sell concrete bases, so you will need to make them yourself.

    Is assembly difficult, and how long does it take and how many people are needed?

    Allow about one to two days, with at least two people. The system is similar to flat-pack furniture; an assembly plan and video are provided.

    How can you prevent the ash pan from warping?

    Add a little sand to the ash pan of the grill grate to limit deformation caused by the expansion of the materials.

    Can the chimney be raised with extensions?

    Yes, 25 cm Chimney extensions are available. You can stack up to four; beyond that, the chimney must be secured to a wall.

    What size opening do you need to install the door or the grill grate?

    It depends on the model: check the product page on the website. Give your mason the dimensions of the niche, not those of the Grate.

    How much material do you need to fill the oven and seal the door?

    Quantities depend on the model: follow the assembly plan or the instructions for your Oven.

    Do you need permission to install a fixed barbecue?

    Not always: the requirements depend on the dimensions, the height and the location. Check with your local council's planning department.

    What are the dimensions of the parts?

    The dimensions of the parts are shown in the assembly plan for your model, and the product measurements are listed on its page on the website.

    How much distance should you leave between the Oven and the wall?

    Leave at least 20 cm, as specified in the Maximus instructions; for other products, follow each product's own instructions. Also allow a gap of about 5 cm from any fixed structure to allow for expansion.

    Do you have to do masonry work to install the Oven?

    No, not necessarily: some ovens are delivered ready to use and only need a stable, level surface.

    Do the hearth pieces need notches for the comb?

    It depends on the model; follow the order in the assembly plan. Contact us if any part looks different from the plan.

    Where should I place the heat-resistant pellets supplied with the Oven?

    The assembly videos show where to place the heat-resistant pellets; the assembly principle is the same for all our ovens. Ask our team for them.

    Can the facing be cut?

    Yes, you can, using an angle grinder and with care, as the material can crumble. A paint touch-up may be needed.

    Can the modules be placed on one side and the barbecue on the other?

    Yes, you can assemble the two modules together on one side and place the barbecue on the right.

    Why doesn't the color match the assembly plan?

    The assembly drawings are for illustration only: the color shown has no bearing on the model delivered, which will match your order.

    Why is the worktop delivered in two pieces?

    The assembly plan for your model shows the parts supplied and how to put them together; contact us if any part looks different.

    Why is there a gap between the oven floor and the oven entrance?

    The floor bricks must touch the oven entrance, with no gap. The only gaps allowed are at the sides and the back, to allow for expansion, so push the bricks toward the front.

    What weather conditions are suitable for assembly?

    This Type of barbecue is designed to withstand bad weather and can be left outdoors. The iron grill grate is more sensitive to moisture: remove it when not in use. After a long period without use, raise the temperature slowly.

    Do you offer 20 cm diameter flue pipes and a roof flashing kit for connecting the barbecue?

    The available flue pipes and roof flashing kits are shown on the site, along with their diameter; check that it matches the outlet of your model.

    Do I need to buy glue or other materials for assembly, or does everything come with the product?

    Assembly follows the assembly plan for each model (tile adhesive or sealant, depending on the model). Please refer to the assembly plan for your model.

    Can't find your answer?

    Write to us or call us Monday to Friday, 10 a.m. to 7 p.m. (CET): +33 1 76 54 74 53 (France) · +351 253 610 557 (Portugal).

    infos@my-barbecue.com