This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.


BLACK FRIDAY •UP TO –20% OFF A SELECTION OF OVENS AND BARBECUES • UNTIL DECEMBER 2

Logo MyBarbecue boutique en ligne de barbecue
Currency

    Cart 0

    No more products available for purchase

    Products
    Pair with
    Subtotal Free
    View cart
    Shipping, taxes, and discount codes are calculated at checkout

    Installation, use and maintenance

    Maintenance and Cleaning

    Cleaning, rain protection, cracks and winter storage: our tips for maintaining your barbecue, grill grate or wood-fired oven.

    39 questions · updated on November 19, 2026

    How can you prevent the ash pan of the grill grate from warping?

    Add a little sand or soil to the ash pan to reduce the risk of warping caused by the expansion of the materials. Place the combustion area as close to the center as possible, and do not put embers near the walls.

    Do you need to protect the barbecue or the Oven from rain?

    Covering is not mandatory, but a cover provides extra protection, especially in winter or during long periods of non-use. Protect the Oven from the weather and prevent water from getting in.

    How do you maintain a painted steel grill grate?

    Place sand or soil in the ash pan, center the combustion area, and don't place embers near the walls. On a cast iron grill grate, the surface in contact with the embers loses its paint after a few uses.

    How do you maintain a wood-fired oven?

    Clean the exterior with a soft, slightly damp cloth, lukewarm water and a little dish soap, making sure the Oven is completely cool. Avoid abrasive sponges, wire brushes and harsh cleaning products. Empty the ashes at least once a week.

    How do you use the Ultrafire kit to repair cracks in the oven?

    For fine cracks, apply the Ultrafire while the oven walls are hot, as described in the oven manual (page 16), on a clean, dry surface after wire brushing. For wide cracks, it is not enough on its own: while the oven is cold, apply a filler to the crack; once it is dry, sand it, heat the oven, and then apply the Ultrafire.

    Why do cracks appear on ovens, and are they normal?

    Yes, small surface cracks are normal on handcrafted ovens: the materials are porous, absorb moisture and expand at different rates. They affect neither the strength nor the safety of the oven. We recommend an annual inspection.

    How do you repair cracks in a wood-fired oven?

    Send us some photos. For fine cracks, use the Ultrafire hot oven kit. For larger cracks, the refractory cement needs 72 hours to dry and a cure of up to 200 °C.

    How do you maintain and store your barbecue for the winter?

    Protect it from direct rain with a well-secured waterproof cover or tarp, and store the Grate in a dry place. Regular maintenance helps limit moisture.

    How do you maintain stainless steel and prevent stains and corrosion?

    Clean after each use with hot soapy water and a non-abrasive sponge, rinse and dry thoroughly, then apply a thin layer of food-grade oil. Do not leave ashes in the firebox, and protect it from the weather with good ventilation under the cover.

    How to touch up or repaint the exterior of an oven or barbecue?

    Clean and dry the area, protect the surrounding surfaces, sand, then spray the paint in thin coats from 20-30 cm away and let it dry for 24 hours. Surfaces must be completely cool.

    Why is the paint on the grill grate peeling off?

    On an iron grill grate, the surface in contact with the embers loses its paint after a few uses. Paint is supplied for touch-ups.

    How do you clean and maintain a concrete barbecue?

    Dry-clean the metal components once they have cooled down, except for the Grate, which can be washed with water and a soft sponge. Concrete elements can be cleaned occasionally with water and a soft brush. Avoid moisture on the metal parts.

    How and how often should you clean the barbecue Grate?

    A quick brushing after each cooking session is enough; do a full degreasing when the Grate becomes sticky or before storing it for a long period.

    How to repair oven joints with refractory cement?

    Clean the joints with a wire brush, apply the Refractory cement with a spatula, and smooth it with a damp cloth. Allow 72 hours to dry, then cure the Oven up to 200 °C.

    What should I do if an interior part of the oven is damaged?

    A small tear in the aluminum foil under the oven floor doesn't prevent you from using the Oven, as long as the insulation underneath is not damaged. In any other case, please send us photos.

    What should you do if the front of the Oven comes loose or deteriorates?

    Please send us photos first. Depending on the case: for small cracks on the outer face, use a chemical anchor (a few hours of drying time); for larger cracks, outside or inside, or for broken or loose pieces, use Refractory cement (72 hours of drying time); if the front as a whole is weakened, use high-temperature adhesive silicone on the edge, on the outer side (24 hours of drying time), and if necessary Refractory cement in the joints between the stones, on the inner side (72 hours); if there is a gap between the stones letting fire or smoke through, use Refractory cement on both the outside and the inside (72 hours). If the front is broken as a whole or has fallen off, we will work out a solution with you based on your photos. To protect it, build the fire at the back or on the side, more than 20 cm from the door, and do not exceed 450 °C.

    How do you clean the blackening on the oven front?

    Clean with a soft, damp cloth and a little soapy water while the Oven is cold. Avoid abrasive products, metal sponges, and solvents.

    How to repair the damaged exterior finish of an Oven?

    Send us photos of the damaged areas. Cracks in the render are cosmetic; depending on their size, we use Ultrafire or a suitable heat-resistant render.

    How to use high-temperature silicone on the oven?

    Apply it only to the front or back of the oven, in areas below 300 °C, never inside the cooking chamber. Let it dry for at least 24 hours before using the oven again.

    How do you inspect, sweep and repair the chimney?

    Clean the chimney flue at least once a year. Current ovens no longer use silicone around the chimney. If the seal on an older oven comes loose, contact us with a photo.

    How do you protect a barbecue from grease and corrosion?

    Apply a clear concrete varnish or a water-repellent product to protect against grease and delay iron corrosion.

    What should you do if your My Barbecue rusts?

    Remove the rust with a wire brush or a rust remover, then repaint the area with a paint suitable for metal. Touch up any chips and scratches right away. If rust appears on stainless steel, send us photos.

    What should you do if the oven thermometer isn't working?

    A small adjustment screw on the back lets you reset it to zero. Then check that it responds to the rise in temperature. If it doesn't, a new thermometer is available on our website.

    How do you protect the barbecue after assembly?

    We recommend applying a concrete varnish or a water-repellent product to protect against grease and delay iron corrosion.

    Can you use water to cool or clean a hot Oven?

    No, never use water to cool down or clean a hot oven: it can cause irreparable damage.

    Do you need to apply a protective product to the oven or the bricks?

    There is no specific year-round product. Protect the Oven with a cover or shelter in winter. An oil-repellent treatment for bricks can be found at a DIY store.

    Why does the back of the oven show deformations?

    They come from using the oven at temperatures above 450 °C and from placing it too close to a wall. Leave at least 20 cm between the back of the oven and any surface.

    What should I do if my Oven has moisture or has gotten wet?

    Let it dry naturally for several days, then do a very gradual first firing. If in doubt, refer to your model's manual.

    What should you do with the ashes from the oven?

    Empty the ashes from the Oven at least once a week using a scraper and a brush, when the Oven is cold.

    How do you reattach the metal strip at the entrance of the oven?

    Sand and clean the area, apply a heat-resistant hybrid sealant, hold the strip in place until it sets, and follow the drying time specified by the product manufacturer.

    How long can you keep an opened cartridge of chemical anchor?

    Once opened, the tube generally keeps for 1 to 2 years if it is tightly resealed and stored in good conditions.

    How do you care for a perforated pizza pan?

    Wash by hand in lukewarm water with a little dish soap; avoid the dishwasher and abrasive products.

    How do you handle and wash the dish to avoid cracks?

    Handle it with care when it is hot, let it cool down completely before washing it, and never apply cold water to it while it is still hot.

    Should you avoid wire brushes?

    On the exterior paint and the front of the oven, yes: avoid wire brushes and abrasive sponges. On stainless steel, it's best to use stainless steel or brass brushes.

    Should the metal parts of the oven be lubricated?

    No, you don't need to lubricate the metal parts of the Oven; regular cleaning of the interior is enough.

    Is mixing vinegar and baking soda a good degreaser?

    Not really: when mixed, they largely cancel each other out. Instead, use a baking soda paste on its own or soak in diluted vinegar, then rinse.

    Why are clay balls falling down the chimney?

    After many years of use, intense heat cycles can wear down the refractory components and release small clay beads. Contact us with photos so we can look into a solution.

    Why does the flame separator plate warp?

    Over time, the stainless steel plate may warp slightly; above 400 °C, the warping can be more significant. A replacement ember separator is available on the website.

    Does tightening the grate support weaken the welds?

    No, applying light force won't weaken the welds. Follow the recommended use, maintenance and fire level to preserve its lifespan.

    Can't find your answer?

    Write to us or call us Monday to Friday, 10 a.m. to 7 p.m. (CET): +33 1 76 54 74 53 (France) · +351 253 610 557 (Portugal).

    infos@my-barbecue.com